F-series metal domes

F series metal domes(snap domes) are with four-legged switches that were designed widely used in the printed circuit boards, flexible circuit boards and membrane switches. Whatever the life cycles and the click feeling, it’s far exceeds the circle shape metal domes. The life cycles of the most F-series metal domes can reach to 1,000,000 times.

The package of this type isn’t only in the bulk by bag, but also can put the metal domes on the array one by one by adhesive tape. Then you can peel off and stick on the location of the PCBs easily. For more information, you can see our “Standard One Key Metal Dome Array”.

The size of the F-series metal domes(snap domes) is from 5mm to 20mm, the force is from 100g to 600g. Commonly used diameter we have 6mm, 7mm,8.4mm, 10mm, 12.2mm,16mm,20mm.

According to metal dome with dimple or not, we divide into two items:

1. NF-series: No dimple

2. DF-series: with dimple


 Our F-series metal domes:
Diameter 5mm, 6mm, 7mm, 8.4mm, 10mm,12.2mm, 16mm, 20mm
Actuation Force 150g,180g, 200g, 220g, 250g, 280g, 320g, 350g,400g, 450g, 500g
Plated Nickel and gold plated are available.

If you have the inquiry of the F series metal domes, please contact us anytime, we are glad to be at your service.

 

Metal Dome Specifications:

1. Material: SUS301 or 304
2. Contact Configuration: SPST, Normally Open,Contact Bounce (on) : <.3ms, Contact Bounce (off) : <6ms
3. Operating & Storage Temperature: -55 C to 125 C
4. Contact Resistance:<100 ohms,With Nickel plated: <1 ohm,Gold plated: <0.1 ohm
5. Voltage/Current Maximum: 12 ma @ 24 volts DC, Breakdown Voltage: Over 200 volts