Posts Tagged ‘triangle metal dome with two legs’

Three points to be attention for using triangle metal domes with legs

Wednesday, December 11th, 2019

We have the triangle metal dome with legs is divided into three items: short legs 0.8mm, middle legs 1.5mm, long legs 3.0mm. Choose the suitable legs based on the thickness of your PCB board.

  1. Insert the legs into the hole of the circuit board first. Generally, the legs length should be longer than the thickness of the circuit board.
  2. Bend the legs on the back of the circuit board to fix it, or paste a little transparent glue on it.
  3. The triangle metal dome with legs is generally suitable for toys, or high force products.

If you need to know more about metal domes, please feel free to contact us.We are the leading manufacturer in China.

Tags:
Posted in Metal Dome | Comments Closed

Triangle metal domes with legs

Tuesday, April 20th, 2010

Now we have three kinds items for triangle metal domes with two legs:

1. width * legth: 0.8mm*0.8mm;
2. width * legth: 0.8mm*1.5mm;
3. width * legth: 0.8mm*3.0mm.

Certainly, we also have some special specification for the triangle metal dome with legs,such as the 1.0mm width of  legs, 1.2mm legth of legs,ect. it’s just to accommodate a wider range of customers in the design and use requirements.

Ok, if you need any further information, please contact us or see the below subjects:
1.Snap Dome Manufacturer and Supplier in china.
2.How to test the life of metal dome?
3.IQC For Metal Domes.
4.FAQs.

Tags:
Posted in Metal Dome, Snap domes | Comments Closed